Will not load at all after first use

SlimBrowser bug reports

Moderator: SlimBrowser Forum Moderators

Post Reply
mikeagner
Newbie
Posts: 7
Joined: Sat Jul 13, 2013 7:21 pm

Will not load at all after first use

Post by mikeagner » Sat Oct 04, 2014 7:36 pm

I am using the latest version of SB on an Asus Netbook with 1GB RAM and Win7 Starter. If I use SB for a bit, shut it down then try to bring it back again, it never loads. I get a message saying that the rendering engine timed out, with options to abort, retry or ignore.

It's very annoying - this started with the most recent release (v 7.0 build 107). Any suggestions about how to fix this?

Thanks Mike

oftentired
Advanced Member
Posts: 910
Joined: Tue Mar 04, 2003 9:39 pm
Location: Las Vegas

Re: Will not load at all after first use

Post by oftentired » Sun Oct 05, 2014 2:25 pm

First thing I would try is to do an uninstall and a reboot, then re-install the most recent version.

mikeagner
Newbie
Posts: 7
Joined: Sat Jul 13, 2013 7:21 pm

Re: Will not load at all after first use

Post by mikeagner » Thu Oct 09, 2014 5:03 pm

Attempted this, and does not work

It seems that if you use a disk defragger (I use Auslogics) something hoses up Slimbrowser.

There was another unasnwered post on this back in July from another individual.

Very disappointed - going back to Chrome.

Mike

Post Reply